Table of Contents
Advertisement
YUTAKI CASCADE CONTROLLER
Menu Contents
Level 1
Level 2
Level 3
Water Pump Configuration
Outdoor average Timer
Minimum ON Time
Minimum OFF Time
Seizure Protection
Fan Coils
Controlled Fan Zones
Delay ON Time
Demand OFF Actions
Optional Functions
Hydraulic Sep. Status
Smart Function
Heating Auto On/Off
Auto Heat/Cool
Hot Water Tank
Emergency Operation
I/O and Sensors
Inputs
Standard outputs
Outputs
Auxiliary sensors
Holiday mode
Affected zones
Start Holiday Mode
Controller Settings
Room Configuration
Room Names
Date and Time
European Summer Time
Hour Format
Screen settings
Language selection
Installer Access
Commissioning
Screed drying
Start Screed Drying
About
System Information
Contact Information
Factory Reset
Lock the controller
Return to user mode
112
PMML0575 rev.1 - 09/2021
Level 4
Level 5
Status
Operation Day
Starting Time
Circuit pump
Recirculation timer
DHW Boost
Installer mode
Icon
means that this menu is available only for installer,
a special user with higher access privileges to configure the
system. In order to access the controller as Installer, go to
"Installer access" menu.
After that, the "Enter password" message is displayed.
The login password for the Installer is:
Right
, Down
Press "OK" to confirm the password.
If the correct access code is entered, the installer mode icon
appears on the notifications bar (bottom line).
Installer mode icon
After 30 minutes of inactivity, it is necessary to repeat the log in
process. To exit the Installer mode and return to the unit menu,
go to the "Return to user mode" on the main menu.
?
N O T E
The following chapters explain the special settings the Installer can edit.
It is important to understand that the Installer can also perform all the
actions available for the typical user.
, Left
, Right
Advertisement
Table of Contents
