Important
Photo Index Sheet cannot be scanned from the ADF.
If <Failed to scan Photo Index Sheet.> is displayed on the LCD, press [OK]. Make sure that
you have marked all the necessary circles on the sheet, and confirm its orientation and
position when it is set on the Platen Glass for scanning.
If the filled circles on the Photo Index Sheet are not marked dark enough, the machine may
not read the settings.
Do not remove the memory card while the machine is printing.
If the Platen Glass is dirty, the machine may not read the settings. See
Platen Glass and Document Cover" on page
If the Photo Index Sheet is dirty, the machine may not read the settings.
Note
To cancel printing, press [Stop/Reset].
To continue to print photographs using subsequent Photo Index Sheets, repeat the
procedure from step 5.
If the memory card has been removed and then reinserted before printing with the Photo
Index Sheet, it may take some time before printing starts.
Chapter 3
155.
Printing from a Memory Card
"Cleaning the
69