Canon PIXMA MP830 User Manual page 36

5
Prepare the Paper Output Tray.
(1) Press the Open Button to open the Paper Output Tray.
(2) Open the Paper Output Tray Extension completely.
(3) Press [Feed Switch] so that the Cassette Lamp (A) lights.
(A)
Note
You can also select the paper source with the printer driver. For details, refer to the Printer
Driver Guide.
Loading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
Important
Envelopes can be used only when printing from a computer.
Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals or
sticker flaps.
Select either [DL Env.] or [Comm. Env. #10] according to the envelope size you are using.
The printed image will be upside down depending on the application. If this occurs, open
the printer properties dialog box then select the [Rotate 180 degrees] check box on the
[Page Setup] tab.
For information on the printer driver settings, refer to the Printer Driver Guide.
1
Align the envelope stack against the right side of the Cassette with the print side
facing DOWN, and the rear flaps UP on the left side.
Note
A maximum of 5 envelopes can be loaded at once.
34 Before Printing
(3)
(2)
(1)
Chapter 1