Canon ZR Instruction Manual page 80

Time Code
0:12:34:10
This records counter information,
including hour, minute, second, and
frame number on a special data code
area on the tape itself. It is reset
automatically when a new tape is
loaded.
Recording reminder
0s e c
10s e c
When you start recording, the camera
counts from 0SEC to 10SEC. Shots
which are shorter than 10 seconds may
be difficult to edit later. On the other
hand, if you are not planning to edit the
recording, remember that a shot which
does not contain action should
generally last no longer than 10
seconds.
Caution phrases
The camera displays various caution
phrases — they appear for 4 seconds
before disappearing.
Appears each time
you turn the power
SET THE DATE AND TIME
on, until you set the
date and time (p. 32).
Appears when the
battery pack is
CHANGE THE BATTERY PACK
exhausted (p. 9, 61).
Appears when the
tape has reached the
end.
Refer to page 12.
THE TAPE IS SET FOR
ERASURE PREVENTION
Appears when you
press the (record)
2
button if the DV cable
is not connected
properly (p. 58).
Refer to page 67.
Appears as a warning
to protect the tape and
REMOVE THE CASSETTE
also when
condensation is
detected. Remove the
tape as soon as
possible after the
camera has displayed
the caution.
Refer to page 59.
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
Refer to page 59.
COPYRIGHT PROTECTED
DUBBING RESTRICTED
E
TAPE END
CHECK THE DV INPUT
CONDENSATION
HAS BEEN DETECTED
81