HP Compaq Presario,Presario 5440 Quick Start Manual page 75

Symptom
Mouse does not work after
installation or is not detected.
Poor reception.
Mouse stops functioning.
6-16 H & S
ELP UPPORT
Problem
Receiver is not connected
properly.
Batteries are not installed properly.
Communication between receiver
and mouse not established.
Receiver too close to other
electrical devices.
Batteries are low.
. /
COMPAQ COM CONSUMERSUPPORT
Solution
Try unplugging then reconnecting the
receiver cable to your computer.
The receiver cable goes into the
computer's USB port or PS/2 mouse
port.
Reinstall the batteries according to
the diagram inside the battery
compartment.
Press the Connect button on the
receiver, then press the Connect
button under the mouse. See the
"Compaq/Logitech Wireless Wheel
Mouse" section for more information.
Place the receiver at least 8 inches or
20 centimeters away from other
electrical devices, such as the
computer, the computer monitor, or
external storage devices.
If you are working on a metallic
surface, try turning the receiver on its
side.
Replace the batteries.
M P
Y RESARIO
—G S
ETTING TARTED