HP Compaq Presario,Presario 5440 Quick Start Manual page 70

Symptom
Screen is blank, and monitor
power light is not lit.
Screen is blank.
M P —G S
Y RESARIO ETTING TARTED
Problem
Monitor power cable is not
connected to the monitor or to
the wall outlet.
Monitor is not turned on.
Monitor connector cable is not
properly connected to the back
of the computer.
Screen saver is enabled.
Computer is in Stand By mode.
If you have a flat-panel monitor
(available on select models), you
may need a Digital Video Interface
and connector.
. /
COMPAQ COM CONSUMERSUPPORT
Solution
Reconnect the power plug on the back
of the monitor and on the wall outlet.
Press the Power button on the front of
the monitor.
Inspect the monitor video connector
for bent pins. If no pins are bent,
reconnect the monitor connector cable
on the back of the computer.
Press any key or move the mouse to
make the screen display visible again.
Press the Power button to resume
from Stand By mode.
Refer to your Certificate of Warranty
for details.
H & S 6-11
ELP UPPORT