HP Compaq Presario,Presario 5440 Quick Start Manual page 67

Symptom
Unable to read the floppy disk.
"Invalid system disk" message
is displayed.
Disk drive light stays on.
Disk drive cannot save
information to floppy disk.
6-8 H & S
ELP UPPORT
Problem
A non-formatted disk has been
inserted.
Floppy disk is damaged.
A floppy disk that does not contain
the system files needed to start
your computer has been inserted
in the drive.
Floppy disk error has occurred.
Floppy disk has been improperly
inserted.
Floppy disk drive is damaged.
Floppy disk is not formatted.
. /
COMPAQ COM CONSUMERSUPPORT
Solution
To format the disk:
1. On the Windows desktop, click
Start then click Control Panel.
The Control Panel window is
displayed.
2. Select the disk (A) drive.
3. Click File, and point to Format.
4. Select the desired options, and
click Start to begin formatting
the disk.
Replace the floppy disk with a new
one.
When drive activity stops, remove the
disk and press the Spacebar.
The computer should start up.
Restart your computer by pressing
the Power button.
Remove the disk and reinsert it as
follows: Insert the edge with the
sliding cover into the drive, face up,
and push the disk all the way in until
it stops.
G
Press the Help button on the
keyboard to access the Compaq
Help & Support Center or refer to your
Certificate of Warranty for details.
To format the disk:
1. On the Windows desktop, click
Start then click Control Panel.
The Control Panel window is
displayed.
2. Select the disk (A) drive.
3. Click File, and point to Format.
4. Select the desired options, and
click Start to begin formatting
the disk.
M P
Y RESARIO
—G S
ETTING TARTED