Advertisement
Tool name/Part number
Damper rod holder
YM-01494, 90890-01494
Fork seal driver
YM-A0948, 90890-01502
Sheave holder
YS-1880-A, 90890-01701
Pocket tester
YU-3112-C, 90890-03112
Timing light
YM-33277-A, 90890-03141
Valve spring compressor
YM-4019, 90890-04019
How to use
Use this tool to remove and install
the damper rod.
This tool is used when install the fork
oil seal.
This tool is used for when loosening
or tightening the flywheel magneto
securing nut.
Use this tool to inspect the coil resis-
tance, output voltage and amper-
age.
This tool is necessary for checking
ignition timing.
This tool is needed to remove and
install the valve assemblies.
1-5
SPECIAL TOOLS
Illustration
Advertisement
