HP Compaq Presario,Presario 1700 Reference Manual page 95

11-8
Troubleshooting Guide
Symptom
Screen is blank.
Screen saver is enabled.
Internet PC is in Sleep mode.
This is identified when the Power
light is flashing (on some models
the Sleep
the flashing Power light).
The external monitor display is
selected.
Display is too faint.
Brightness and contrast controls,
functional on HPA displays only,
are not set properly.
Display only fills part
Your resolution settings are not
of the screen. set properly.
Garbled characters
The external monitor's resolution
display or the is set too high for your Internet
display flashes when PC.
the computer is
connected to an
external monitor.
Display
Problem
Press the spacebar or click the
TouchPad.
Press the spacebar to wake your
Internet PC.
n
icon is lit instead of
Press the Fn+F3 keys to switch
between the LCD display, external
monitor, TV Out (available on select
models), or simultaneous display.
Turn up the brightness or contrast
controls on your display. Note that
contrast controls are functional only
with HPA displays. Refer to Using Your
Mobile Internet PC for details.
1. On the Taskbar, click the Start
2. Click Control Panel.
3. Double-click Display.
4. Click the Settings tab.
5. In the Screen area, click the
6. Click OK to accept the new
Restart your Internet PC and reset the
Display settings for a lower resolution.
Refer to the solution for "Display only
fills part of the screen" for more details.
Solution
button and point to Settings.
resolution slider and drag it to the
desired resolution.
settings, then close the Control
Panel window.