Diskette Drive and SuperDisk (available on select models) Drive
Symptom
SuperDisk (available
SuperDisk Accelerator and
on select models)
Staging Enabled are not enabled.
performance is slow.
Cannot eject the
Power is not on.
SuperDisk (available
on select models).
After copying files to the
SuperDisk, the Performance
Accelerator (PA) is enabled. The
PA locks the drive until the copy
process is complete.
"Disk Full" message
SuperDisk capacity of 120MB
is displayed when
has been reached.
copying files to
SuperDisk (available
on select models).
Root directory of SuperDisk is
full.
Problem
Enable the SuperDisk Accelerator and
the Staging Enabled. Refer to SuperDisk
Accelerator in the Feature Guide for
details.
Manually eject the disk (see SuperDisk
in the Reference Guide for details) or
turn the power on.
Wait for the copy process to complete,
and then try to eject the SuperDisk.
Copy files to a new SuperDisk, or verify
information on SuperDisk is not critical
and consider deleting files to create
space on SuperDisk for new files.
Create new folders on the disk, and
copy the files into the folders.
Troubleshooting Guide
Solution
11-7