Important Safety Instructions - DeWalt XR LI-ION DCMPS567N Original Instructions Manual

y ) Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery Tool Use and Care
z ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
aa ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
ab ) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
ac ) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
ad ) Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
ae ) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
af ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly
or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
Service
ag ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
ah ) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.

IMPORTANT SAFETY INSTRUCTIONS


WARNING:
• Before any use, be sure everyone using this unit reads
and understands all safety instructions and other
information contained in this manual.
• Save these instructions and review frequently.

WARNING:
appliances, basic safety precautions should always be
followed to reduce risk of fire, electric shock, and personal
injury, including the following.
1 . Avoid Dangerous Environment – Don't use appliances in
damp or wet locations.
To reduce risk of injury:
When using electric gardening
2 . Don't Use In Rain.
3 . Keep Children Away – All visitors should be kept at a distance
from work area.
4 . Dress Properly – Do not wear loose clothing or jewelry. They
can be caught in moving parts. Use of rubber gloves and
substantial footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
5 . Use Safety Glasses – Always use face or dust mask if
operation is dusty.
6 . Use Right Appliance – Do not use appliance for any job
except that for which it is intended.
7 . Don't grasp the exposed cutting blades or cutting edges
when picking up or holding the appliance.
8 . Don't Force Appliance – It will do the job better and with
less likelihood of a risk of injury at the rate for which it was
designed.
9 . Don't Overreach – Keep proper footing and balance at all
times.
10 . Stay Alert – Watch what you are doing. Use common sense.
Do not operate appliance when you are tired.
11 . Disconnect Appliance – Remove the battery when not in use,
before servicing, when changing accessories such as blades,
and the like.
12 . Store Idle Appliances Indoors – When not in use, appliances
should be stored indoors in dry, and high or locked-up place –
out of reach of children.
13 . Maintain Appliance With Care – Keep cutting edge sharp
and clean for best performance and to reduce the risk of injury.
Follow instructions for lubricating and changing accessories.
Inspect appliance power source periodically, and if damaged,
have it repaired by an authorized service facility. Keep handles
dry, clean, and free from oil and grease.
14 . Check Damaged Parts – Before further use of the appliance,
a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any
other condition that may affect its operation. A guard or other
part that is damaged should be properly repaired or replaced
by an authorized service center unless indicated elsewhere in
this manual.
SAVE THESE INSTRUCTIONS

WARNING - Do not operate near electrical power
lines. The unit has not been designed to provide protection
from electric shock in the event of contact with overhead
electric lines, Consult local regulations for safe distances
from overhead electric power lines and ensure that the
operating position is safe and secure before operating the
saw chain pole pruner.
• Keep all parts of the body away from the saw chain. Do
not remove cut material or hold material to be cut when
blades are moving. Make sure the switch is off when
clearing jammed material. Blades coast after turn off. A
moment of inattention while operating the pole saw may result
in serious personal injury.
English
7