Table of Contents
Advertisement
Advanced settings
■
You can make settings for operations available when the tablet is
connected to a Bluetooth Smart device.
1
In the Bluetooth screen, [B] of a connected
Bluetooth Smart device/[Advanced settings]
2
Select an item
Incoming call
notification: Set whether to notify you through
the Bluetooth Smart device when receiving a call.
Mail reception
notification: Set whether to notify you through
the Bluetooth Smart device when receiving a mail.
Alarm
notification: Set whether to notify you through the
Bluetooth Smart device when an alarm rings.
Schedule
notification: Set whether to notify you of schedule
notifications from the calendar through the Bluetooth Smart
device.
Time change
notification: Set whether to synchronize clocks
between the Bluetooth Smart device and the tablet.
Link loss
notification: Set how to notify you when the
Bluetooth connection is temporarily disabled.
NFC communication
NFC stands for Near Field Communication and is a near field
wireless communication system which conforms to the
international standards set by ISO (International Organization
for Standardization). You can use the contactless IC card
function, reader/writer function (R/W), Peer to Peer function
(P2P), etc. on the tablet.
Android Beam
You can send and receive data to and from devices which
support Reader/Writer, P2P function.
Enable [Reader/Writer, P2P] and set Android Beam to [ON] in
advance (nP. 46 "NFC/Osaifu-Keitai settings").
Android Beam is not available when NFC/Osaifu-Keitai lock is
set.
Android Beam may not be available depending on the app.
Communication with all devices which support Reader/Writer,
P2P function is not completely guaranteed.
The precautions about using Android Beam are the same as
those about iC communication (nP. 75 "When using iC
communication").
Other precautions are the same as those for when you hold the
tablet over the other device (nP. 46 "Precautions about holding
over the other device").
Sending data
■
Example: Phonebook
1
In the home screen, [R]/[docomo
phonebook]/[Contacts]/select a name
2
Place the a mark over that of the other party's
device
: [Touch to beam] appears.
: If "License Agreement" is displayed, check the content,
follow the instructions on the screen and operate.
3
Touch the screen
Receiving data
■
1
Place the a mark over that of the other party's
device
78
Data Communication
Advertisement
Table of Contents
