Table of Contents
Advertisement
*9 Set the virtual connection with a serial cable and interconnect
between devices.
*10 Transfer phonebook data on the tablet memory to a Bluetooth
device. Data may not be displayed correctly on the other party's
device depending on the contents of the transferred phonebook
data.
*11 Join a PC network etc. and share the Internet connection. Also,
connect a PC etc. to the tablet via Bluetooth to use the
Bluetooth tethering.
*12 Communicate data with a commercially available health
appliance compatible with Bluetooth such as a weighing
machine.
*13 Make a Bluetooth device ring or vibrate when the Bluetooth
connection is terminated after it is moved away from the tablet.
*14 Make the tablet/a Bluetooth device ring or vibrate by operating
the tablet/the Bluetooth device.
*15 Notify you of incoming calls, new mails, etc. through a
Bluetooth device.
*16 Stop the ringtone or the vibrator of the tablet by operating a
Bluetooth device.
*17 Synchronize clocks between a Bluetooth device and the tablet.
*18 Connect a Bluetooth Smart device such as a keyboard and
mouse to the tablet to operate the tablet from the device.
Refer to the manual for the Bluetooth device as well.
The settings of access points for DUN profile can be changed
from a Bluetooth device such as a PC or car navigation system.
If connection to an access point via DUN profile becomes
unavailable, it is recommended to initialize access points
(nP. 23 "Resetting an access point").
You may not hear TV audio etc. with Bluetooth devices which
are not compatible with SCMS-T.
Precautions about handling Bluetooth devices
Note the followings when using Bluetooth devices.
Note the followings to make good connection.
Keep the distance between the tablet and another Bluetooth
device within approximately 10 m with no obstructions in
sight. The distance within which you can make connection
may be shorter when there are obstructions between them
or depending on the conditions of the surroundings (such as
walls or furniture) and the structure of a building. Especially
when there is a wall or floor of reinforced concrete between
them, they may be unable to connect with each other. Note
the above mentioned distance is not guaranteed.
Move the tablet and another Bluetooth device as far away as
possible from home electric appliances, AV devices, OA
devices, etc. before connection. Bluetooth devices are liable
to be adversely affected by a microwave oven, so move
them as far away as possible from the microwave oven
while using them. Otherwise, normal connection cannot be
performed when other electric devices are powered on or
Bluetooth devices may cause noises or reception failure on
a TV or radio set.
Move the Bluetooth device to a place where connection is
possible when there is a broadcast station or radio near the
Bluetooth device and the tablet cannot be connected to the
device. Strong radio waves may prevent connection
between Bluetooth devices.
Wireless connection is available with Bluetooth devices put
in a bag or pocket. However, lowering of communication
speed or noise may result when you are in between the
Bluetooth device and the tablet.
Electromagnetic signals from Bluetooth devices may affect the
operation of electronic medical equipment etc. As some cases
may result in accident, turn off the tablet and other Bluetooth
devices in the following places.
On trains
On airplanes
Near automatic doors or fire alarms
In places such as gas stations where flammable gas is
generated
Radio interference with Wi-Fi compatible devices
The Bluetooth devices use the same frequency band (2.4
GHz) as wireless LANs (IEEE 802.11b/g/n). Therefore, using a
Bluetooth device near a wireless LAN device may cause the
radio interference, lowering of communication speed, noise or
connection failure. In this case, turn off the wireless LAN
device or keep the tablet and the Bluetooth device at least
approximately 10 m away from the wireless LAN.
Using Bluetooth function
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
tablet and the other party's Bluetooth device.
Set the other party's Bluetooth device to the registration stand-by
status in advance.
1
In the home screen,
[Bluetooth]
2
Slide [OFF] to the right
3
Select a Bluetooth device/[Pair]
: The confirmation screen for connection may be displayed.
: Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start connecting after completing
registration.
76
In hospitals
[R]/[Settings]/
Data Communication
Advertisement
Table of Contents
