Table of Contents
Advertisement
PUK (PIN Unlock Key) is described in the agreement form
(customer copy) you received at the time of subscription at a
docomo Shop. If you made a subscription at a shop other than a
docomo Shop, bring your identification (a driver's license etc.)
and your docomo mini UIM card to a docomo Shop or contact the
number listed in "General Inquiries" on the last page.
Security key (security code for various functions)
■
If you set any restrictions, you need to enter the security key to
temporarily disable them. [Passcode] ([0000]) is set as a security
key by default but you can change it (nP. 70 "Changing security
key").
If you enter wrong security keys five times continuously, you
cannot enter it for 30 seconds.
Network security code
■
Network security code is a four-digit code required for confirming
the subscriber's identity when an order is received at a docomo
Shop, docomo Information Center or "お客様サポート" (Support),
used for accessing various network services, etc. You can set any
code at the time of subscription but you can change the code.
For details on network security code, refer to the DOCOMO
website.
PIN code
■
A docomo mini UIM card has a security code called PIN code. This
security code is set to [0000] by default but you can change the
code (nP. 70 "Setting up SIM card lock").
The PIN code is a four- to eight-digit security code that needs to be
entered for recognizing the user of the tablet every time a docomo
mini UIM card is inserted or when a device is turned on to prevent
unauthorized use of the docomo mini UIM card by a third party.
Making/Receiving a call and the device operation are enabled by
entering PIN code.
Use the previously set PIN code when inserting a docomo mini
UIM card that has been used in another device. It is [0000] if the
setting has not been changed.
If you enter wrong PIN codes three times continuously, it is
locked and the docomo mini UIM card becomes unavailable. In
this case, unlock with "PUK" (PIN Unlock Key).
PUK (PIN Unlock Key)
■
PUK (PIN Unlock Key) is an eight-digit number used to disable the
PIN code lock. You cannot change the code.
If you enter wrong codes ten times continuously, the docomo
mini UIM card is completely locked. In this case, contact a
docomo Shop.
Changing security key
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Application lock]
2
Enter the passcode/[OK]/[Change security
key]
3
Select an item
Finger
list: Set a pattern which forms by linking four or more
dots.
Passcode: Set four- to sixteen-digit number.
Password: Set four to sixteen alphanumerics or half-width
symbols including at least one alphabet.
Setting up SIM card lock
You can make settings for the PIN code.
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Set up SIM card lock]
2
Select an item
Lock SIM
card: Set whether to enter the PIN code when the
power is turned on.
Change SIM
PIN: Change the PIN code.
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo mini UIM card is not inserted,
while the PIN code is locked or from the PUK (PIN Unlock Key)
entry screen.
The setting is saved on the docomo mini UIM card.
Disabling PIN lock
1
In the PIN locking screen, enter PUK (PIN
Unlock Key)
2
Enter a new PIN code
3
Enter the new PIN code again
Encrypting tablet
You can encrypt data on the tablet.
If you carry out Encrypt tablet, the password entry screen for
decrypting the storage is displayed every time the power is
turned on. Enter the lock number or password set in Screen lock.
Carry out Reset all to disable Encrypt tablet (nP. 71 "Resetting
all").
Carry out the operations while charging the battery with its
battery level still left sufficiently.
Set Screen lock to Lock No. or Password in advance
(nP. 68 "Lock & security").
1
In the home screen, [R]/[Settings]/[Lock &
Security]/[Encrypt tablet]
2
[Encrypt tablet]/enter the lock number/
password/[Continue]
3
[Encrypt tablet]
In the password entry screen for decrypting the storage, you
cannot make a call to the emergency number (110, 119 or 118).
Note that all data on the tablet are deleted if Encrypt tablet is
interrupted.
If you enter wrong lock numbers/passwords ten or 20 times in a
row when decrypting the storage, you cannot enter the lock
number/password for 30 seconds. Note that if you enter wrong
lock numbers/passwords 30 times in a row, the tablet is
initialized.
Language & input
You can make settings for the language displayed on the
screen, character entry, text-to-speech, etc.
1
In the home screen,
[Language & input]
2
Select an item
Current selected
when entering characters.
Google
Keyboard: Make settings for Google Keyboard.
70
[R]/[Settings]/
keyboard: Set the input software to use
Tablet Settings
Advertisement
Table of Contents
