How To Use The Appliance; Turning The Power On; After Washing Hands; If Not Using For A Long Period - Mitsubishi Electric Jet Towel JT-SB216JSH2-H-NE Instruction Manual

How to use the appliance

■ Turn the ground-fault circuit interrupter "ON".
The power light (blue) turns on.
Caution
Do not turn the power on when your hands or an object are inside the hand drying area.
The sensitivity of the sensor may be reduced if the power is turned on while your hands or objects are
inside the hand drying area.
If the sensitivity of the sensor is reduced, please turn the power off and then back on after one minute.

■ After washing hands

1
Wet hands
Automatic Stop Function
The power lamp flashes and the dryer stops automatically if the appliance is used continually for more than
30 seconds. To continue using the hand dryer, remove your hands, and then re-insert them.
Simple heater
Softens the feeling of cold air.
If the room temperature is above 30ºC, the heater will stop working to prevent the temperature from
rising too high.
NOTE
If the room temperature is less than 18ºC, the air may feel cold.

■ If not using for a long period

Turn the ground-fault circuit interrupter "OFF".
2
Insert hands from the side
※ Repeat 2-3 times
All models
JT-SB216JSH2 type only (not applicable to JT-SB216KSN2)
3
Bring hands upwards
− 4 −
4