Installation Conditions; Required Space For Installation; Suitable Walls; Making The Appliance Easier To Use - Mitsubishi Electric JT-SB216JSH-W-E Installation Manual

Hand dryer
Hide thumbs Also See for JT-SB216JSH-W-E:
Table of Contents

Advertisement

Installation conditions

Required space for installation

Be sure to secure at least the distances
Cautions
listed in the right-hand table from walls,
flammable (combustible) materials and
so on.
Ensure a distance of at least 130mm from
the floor. Failure to do so may result in dirt
or water entering the appliance, causing
damage.
Ensure there is at least 150mm on
both sides of the appliance to allow for
maintenance.

Suitable walls

Flat walls with no unevenness.
Walls that can support the weight of the appliance.
Reinforce any walls made with materials other than
concrete.
When installing on a concrete wall, use commercially
available metal screw anchors.

Making the appliance easier to use

Refer to the "Installation position guide".
Leave at least 200mm clearance on the left to make
maintenance easier.
Avoid locations where people or doors might bump
into the appliance.
Left
Below
Installation position guide
5
Wall
Right
Location Clearance
Top
Left
Right
Front
Below
Unit (mm)
For men: 925mm
For women: 905mm
Open
150mm
150mm
Open
130mm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jt-sb216jsh-s-eJt-sb216ksn-w-eJt-sb216jsh-h-e

Table of Contents