Advertisement
Machine Translated by Google
Is it a malfunction? If you think
It may be mistaken for a malfunction due to a slight operation error or wiring
error. Please check the following before requesting repair.
Symptom
can not turn on
There is no sound.
Even if I insert
the CD, it comes out.
The sound of the CD skips
due to vibration.
The sound quality of the CD is poor.
The CD does not fit.
Origin
Incomplete power cord
connection.
Incomplete speaker cord
connection.
volume
VOL (volume) is low.
The CD is terribly dirty.
The ambient temperature is extremely high.
There is condensation.
The installation is bad.
Bad CD.
The CD is dirty.
Bad CD.
The CD is dirty.
There is condensation.
I already have a CD or MD
and am trying to insert a
second one.
Placement
Check the power cord connection.
Check the speaker cord connection.
Therefore, increase the VOL (volume) according to
volume
"To adjust the audio" (page 19).
Try cleaning the CD. (Refer to "Handling CDs"
on page 11.)
Please use after lowering the temperature inside the car.
Please use it after leaving it for a while.
Please fix it firmly.
Please listen to other CDs. If it improves, the CD
may be defective.
Try cleaning the CD. (Refer to "Handling CDs"
on page 11.)
Please listen to other CDs. If it improves, the CD
may be defective.
Try cleaning the CD. (Refer to "Handling CDs"
on page 11.)
Remove the CD and leave the unit for a while
before using it.
Remove the CD or MD that is included, and then
insert the next CD.
othe
52
Advertisement
