Advertisement
Machine Translated by Google
Precautions for use
About the temperature inside the car
The temperature inside a car with the windows closed, such as in midsummer, becomes quite high. When the internal
temperature of this unit becomes higher than the standard, the circuit that protects the inside works to automatically stop the
playback of the disc and eject it. In such a case, open the window and lower the temperature inside the car before using.
About condensation
Dew (water droplets) may form on the optical lens inside the unit, such as on a rainy day,
when the humidity is extremely high, or when it is cold, immediately after the heater is turned
on. If this is left as it is, the laser may not be able to read and the machine may not operate normally. In such a
case, depending on the surrounding conditions, if you take out the disc and leave it for about 1 hour, the
condensation will be removed and it will operate normally.
Liquid crystal display The
display may be difficult to see at extremely high or low temperatures, but this is not a malfunction.
When the ambient temperature returns to normal temperature, it returns to the normal display.
About sound skipping of CDs Sound
skipping may occur when the CD is installed improperly or when driving on
an extremely poor road surface. In such a case, check the mounting condition and
return to the road with good road surface before using.
About 8cm CD
This unit does not require an 8cm CD adapter. Insert the 8cm
CD as it is, just like the 12cm CD. Using an 8cm CD adapter may cause a
malfunction.
About disk storage
Be sure to remove the disc when not in use. It may cause warping due to the influence
of direct sunlight. Be sure to put the disc in a case and store it in a place out of direct sunlight.
It may not operate normally when it is extremely cold or
extremely hot. In such a case, warm the inside of the car to
an appropriate temperature before use.
Firs
Ten
Advertisement
