Advertisement
Machine Translated by Google
How to install
Installation depends on the model and model year.
Temporarily wire before installing and fixing, and the machine operates normally without any mistakes in the wiring.
Please make sure that.
Example when installing on a 2DIN size adopted vehicle
1
Genuine mounting bracket from the existing car stereo
Remove. (At this time, the removed screw
Please be careful not to lose it. )
2 4
attached countersunk screws (M5 x 8 mm) or 4 bind head screws (M5 x 8 mm)
Use to fix the genuine mounting bracket to this machine.
Since the shape of the genuine mounting bracket differs depending on the model, the mounting holes on the side of this machine are genuine mounting brackets.
Please use the place where the ingredients fit.
Genuine depending on the model
The protrusion of the mounting bracket hits
There is a part. this
When, hang the protrusion
Hit with a mar etc.
Flatten and then install
Please take it.
ancestor
of
A few words
other
¡ A 2DIN-adopted vehicle is commonly known as an audio space with a set width of 180 mm and a height of 100 mm.
It is a car that can be installed.
¡ When using the mounting holes on the back of this machine, use M5 x 8 (MAX) screws.
51
Included countersunk screws (M5 x 8 mm) or
bind head screws (M5 x 8 mm)
Genuine mounting bracket
Mounting screw
(removed in 1)
* The above mounting method is an example of a Toyota car.
Genuine mounting bracket
Mounting screws
This machine
Pocket box
Existing
car stereo
Pocket box
Advertisement
