Advertisement
Machine Translated by Google
Before installation (1)
q Be sure to read "Safety Precautions" (pages 5-9) before wiring and installation.
when.
q Follow "Wiring" (pages 49 and 50) and "Installation" (page 51).
Please wire and install correctly.
About memory
To prevent short-circuit accidents, remove the _ terminal of the battery during wiring work,
but at this time, this unit and other devices (car stereo, clock, drive computer, navigation
computer, etc.) that are backing up from the battery are It may stop or the memory may
disappear. In such a case, set again after wiring and installation are completed.
About speaker cord connection
Observe the following to prevent the machine from malfunctioning or being damaged.
¡ Be sure to use a speaker with an impedance of 4ÿ to 8ÿ. ¡ For the speaker
installation, refer to the speaker manual. ¡ Never connect the speaker cord of
this unit to the power supply. ¡ Be careful not to mistake the polarity + _ of
the speaker cord.
About mounting angle
Install it so that it is as horizontal as possible to prevent
vibration caused by the unevenness of the road surface.
When tilting, make sure that the angle is within 30 °.
others
47
Within 30
°
Advertisement
