Auxiliary Functions; Starting The Programme - Blomberg LDF30110W User Manual

Operating the product

Auxiliary functions

Washing programmes of your
dishwasher are designed to obtain the
best cleaning effect, considering the
type of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions are provided in
order to enable you to save time, water
and energy and to perform a more
comfortable washing with conditions
specific to you.
C
Auxiliary functions may
cause changes in the
programme duration.
Half Load function
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off
key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half
Load indicator will become on in the
function selection indicator and on the
display.
4. Start the programme by pressing
Start / Pause / Cancel key.
C
With the Half Load function
you can save both water and
power while using the lower
and upper baskets of the
machine.
Dishwasher / User manual

Starting the programme

To start your machine after selecting
the programme and auxiliary functions,
press Start/Pause/Cancel key.
C
Your machine performs
water softening depending
on the hardness level of
the mains water. Due to
water softening process the
programme duration may
change. The programme
duration can also change
while the programme is
running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the
dishes.
C
Pay attention not to open the
door of the machine when it
is running. Stop the machine
by pressing Start/Pause/
Cancel key if you have to
open the door. Then, open
the door of the machine.
There may be a rush of
vapour when you open the
door of your machine; be
careful. Close the door of
your machine and press
Start/Pause/Cancel key
again. Programme will
resume running.
25 / 40 EN