Table of Contents
Advertisement
Adjusting Projected Images
c
Select Gamma, and then press the [
d
Select Customized, and confirm using the [
e
Select Adjust it from the image, and confirm using the [
button.
] button.
] button.
]
f
Move the cursor on the projected image to the part where you
want to change the brightness, and then press the [
If you press [
], the image flashes and you can check the tone area
of the adjustment target.
g
Use the [
][
] buttons to make adjustments, and then confirm
using the [
] button.
h
When Do you want to continue adjusting the setting? is
displayed, select Yes or No.
To adjust another location, select Yes, and repeat the procedure from
step 6.
93
] button.
Advertisement
Table of Contents
