Settings Related To Display - Epson EB-G7905UNL User Manual

Installing the Projector

Settings related to display

Purpose
To change the menu position.
To change the menu direction.
To prevent the display of menus,
messages, or warnings on the
screen.
To disable the display of the
message on the projection screen
when switching the source.
To reduce the display delay of the
image.
Setting Methods
Change the settings of Menu Position.
s Extended - Display - Menu Position
Change the settings of OSD Rotation.
s Extended - Display - OSD Rotation
Use User Button to set On-Screen Display to
User Button 1, User Button 2, or User Button
3.
s Settings - User Button p.138
When you press the button for which On-Screen
Display is assigned, menus or messages are not
displayed on the screen. When the same button is
pressed, they are displayed again. If On-Screen
Display is enabled, you cannot operate the
Configuration menu (except switching the color
mode and input source).
Set Messages to Off. (Default value: On)
s Extended - Display - Messages p.140
You can confirm warning by the display of the
indicator.
s "Reading the Indicators" p.164
Dialogs related to operations and behaviors, lamp
replacement notification, termination of Message
Broadcasting, and projector ID are displayed.
Set Image Processing to Fast 1 or Fast 2.
s Signal - Advanced - Image Processing
p.137
Purpose
To register and save the settings of
the projected image.
p.140
p.140
To change the screen displayed on
the background.
Setting Methods
Set Memory.
s "Memory Function" p.121
You can save the following settings.
• Memory: Some settings in the Configuration
menu
• Lens Position: Adjustment values of the lens
shift, zoom, focus, and distortion
• Geometric Correction: Adjustment value of
the geometric correction
Change from Display. You can select from blue,
black, and logo. If no logo is registered, the
EPSON logo is displayed.
Display Background: Set the screen display with
no image signal input. (Default value: Blue)
s Extended - Display - Display Background
p.140
Startup Screen: Set whether or not (On/Off) to
display the user logo when the projector is turned
on. (Default value: On)
s Extended - Display - Startup Screen
45
p.140