Settings Menu - Epson EB-G7905UNL User Manual

List of Functions
Submenu
Sync. (Only available when an analog RGB computer signal is being
input.)
You can adjust computer images when flickering, fuzziness, or
interference appear in the images.
Position You can adjust the display position up, down, left, and right when
a part of the image is missing so that the whole image is projected.
(Only available when an analog RGB computer signal is being
Auto Setup
input.)
Set to On to automatically adjust Tracking, Sync., and Position to
the optimum state when the input signal changes.
Changes the output image ratio (the range of the projected
Overscan
image). You can set the cropping range to 4% or 8%. When set to
Auto, this is automatically adjusted according to the input signal.
Blanking
You can hide images in the set area. Use the [ ][ ] buttons to
adjust the area. You can adjust by using a combination of Top,
Bottom, Left, and Right.
You can set by choosing the following items.
Advanced
Video Range: Select the video range for the input signal from the
HDMI port, DVI-D port, or HDBaseT port. Set to Expanded if
you are concerned about misadjusted black levels or blown out
highlights in the image.
Input Signal: Select an input signal from the Computer port or
BNC port. If set to Auto, the input signal is set automatically
according to the connected equipment. If colors do not appear
correctly when set to Auto, select the appropriate signal
according to the connected equipment.
Image Processing: Changes settings for image processing.
• Fine: When Frame Interpolation is On, Frame Interpolation
is enabled.
• Fast 1: Images are displayed quicker without any loss in image
quality.
• Fast 2: Images are displayed quicker than Fast 1.
Function Submenu
Scale When using multiple projectors to project one image, adjust the
range of the image displayed by each projector.
s "Displaying a Scaled Image"
You can reset all adjustment values on the Signal menu to their
Reset
default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu"

Settings Menu

Function
p.111
p.153
138