Sony FDRX3000/W Manual page 94

When Beep is set to OFF, the connection beep does not sound.
If the connection does not complete, congestion of the radio wave might be the cause. Retry the connection
by changing the place.
[88] Using the camera connected to other devices via Wi-Fi
Connecting multiple cameras to Live-View Remote
(Multi connection)
This section explains how to connect to Live-View Remote "RM-LVR3". If you are using other Live-
View Remote, see Help Guide of the relevant remote control.
Turn on the Live-View Remote.
1
For details, refer to "Connecting the remote control to multiple cameras via Wi-Fi" in the Help
Guide of the Live-View Remote (RM-LVR3).
http://rd1.sony.net/help/cam/1650/h_zz/
Set the camera.
2
When you connect the camera to Live-View Remote for the first time
Press the MENU button, then press the UP button or DOWN button to select
Settings) -
the REC/ENTER button.
When the connection beep sounds and
camera using the Live-View Remote.
appears on the display panel of the camera when connecting finishes. Press the
REC/ENTER button.
When you connect the camera to Live-View Remote since second time
Press the MENU button, then press the UP button or DOWN button to select
Settings) -
the REC/ENTER button.
If you will continue to connect multiple cameras, repeat from step 2.
3
Note
When Beep is set to OFF, the connection beep does not sound.
(Wi-Fi connection setting) -
(Wi-Fi connection setting) -
Connecting to the Live-View Remote
(multi connection) -
is displayed on the display panel, register the
(multi connection) -
(Camera
, then press
(Camera
, then press