Sony FDRX3000/W Manual page 58

[55] Changing the Settings
Format
Formatting is the process of deleting all images in the memory card, and restoring the memory card
to its initial state.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
(Format), then press the REC/ENTER button.
Formatting starts when you select
appears.
Formatting cancels when you select
The formatting completes when a screen with check mark is displayed. Press the REC/ENTER
button to return to the previous MENU.
Note
Save important images before formatting. The protected data is also initialized.
Do not perform any of the following operations while formatting.
Press a button.
Eject the memory card.
Connect/disconnect a cable.
Insert/remove the battery pack.
[56] Changing the Settings
Time code/user bit (FDR-X3000)
About time code
Time code is a useful function for advanced image editing, which records
hours/minutes/seconds/frames on the image data.
About user bit
User bit is a function that can record information (8-digit hexadecimal numbers) such as
date/time/scene number. This function is useful for editing movies created using two or more
cameras.
Camera settings
, then press the REC/ENTER button. The progress bar
, then press the REC/ENTER button.
Camera settings
(Camera Settings) -