Sony FDRX3000/W Manual page 42

* You can check the estimated shooting time by setting the shooting mode to "Movie mode."
* Even you have a free space of a memory card according above estimated time, a warning [05-04] may display on the screen due to image
quality setting or movie format setting.
In this case, increase more free space of a memory card or change the image quality setting or movie format setting.
[32] Changing the Settings
Still image mode switching
You can set the mode for still image recording.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
image mode switching) - setting value, then press the REC/ENTER button.
(Single shooting. Shoots a single still image.)
Image size
FDR-X3000/HDR-AS300: 12.0 M (Angle setting:
(Angle setting:
HDR-AS50: 11. 9 M (Angle setting:
(Burst shooting. Shoots at the interval set in the
(HDR-AS50) (Still image shooting interval).)
Image size
FDR-X3000/HDR-AS300: 12.0 M (Angle setting:
(Angle setting:
HDR-AS50: 11.9 M (Angle setting:
(Motion Shot LE. Generates a still image from the still images continuously shot at the
interval set in the
interval).)
Image size
FDR-X3000/HDR-AS300: 2.1 M
HDR-AS50: 3.0 M
To shoot successfully in Motion Shot LE mode
Try the following shooting methods.
Stabilize the camera to prevent camera shake.
Use the remote control function with a smartphone or Live-View Remote, or the self-timer
function to prevent camera shake for better results.
Make sure that the moving objects are not too large or too many.
Shoot in a bright location and avoid changes in brightness.
To shoot successfully in burst shooting mode
Shooting settings
)
)
(FDR-X3000/HDR-AS300)/
(Photo mode setting) -
) /6.1 M (Angle setting:
)/7. 0 M (Angle setting:
) /6.1 M (Angle setting:
)/7.0 M (Angle setting:
)
(FDR-X3000/HDR-AS300)/
)
(HDR-AS50) (Still image shooting
(Still
) /3. 0 M
) /3.0 M