Sony FDRX3000/W Manual page 66

Note
Auto power off is not available in the following situations.
When recording data to media
When shooting movies, or shooting in time-lapse capture mode
During movie playback
When Wi-Fi connection is being established, Wi-Fi remote control is connected, an image is being
uploaded to a smartphone, or live streaming
HDMI connection is being made. (FDR-X3000/HDR-AS300)
Supplying power from a connected USB device
Connecting a mass storage device
IR remote is set to ON. (FDR-X3000)
In the following cases, even if you have selected
time that elapses before the power turns off will be extended.
While adjusting the menus.
While playing back still images
[65] Changing the Settings
Switching NTSC/PAL
You can select the NTSC/PAL setting, depending on the TV system of the country or region where you
use the camera.
Press the MENU button.
1
Press the UP button or DOWN button to select
2
/
(Switches the camera from NTSC to PAL)
(Switches the camera from PAL to NTSC)
When you try to change the current setting, the confirmation screen appears. Go to step 3.
Press the UP button or DOWN button to select
3
button.
When the setting change is completed, the camera restarts automatically.
Camera settings
(Switching NTSC/PAL), then press the REC/ENTER button.
or in the auto power off function, the
(Camera Settings) -
, then press the REC/ENTER