Table of Contents
Advertisement
6
[FLARE] button
7
[KNEE] button
8
[DTL] button
Use this button to display the flare menu.
"14 FLARE" (see page 75)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Use this button to display the knee menus.
The menus will switch with each press of the button.
[KNEE]
[WHITE CLIP]
menu off (status screen)
"17 KNEE" (see page 79)
"18 WHITE CLIP" (see page 80)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
Use this button to display the HD detail and UHD detail menus.
The button functions will switch with ROP menu setting.
When the [ROP SETTING] > [DTL BUTTON] setting is [HD]:
Use this button to display the HD detail menus.
The menus will switch with each press of the button.
[HD DETAIL]
[HD SKIN TONE DTL]
"20 HD DETAIL" (see page 82)
"23 HD SKIN TONE DTL" (see page 86)
"28 DNR" (see page 96)
When the [ROP SETTING] > [DTL BUTTON] setting is [UHD]:
Use this button to display the UHD detail menus.
The menus will switch with each press of the button.
[UHD DETAIL]
[UHD SKIN TONE DTL]
"21 UHD DETAIL" (see page 84)
"24 UHD SKIN TONE DTL" (see page 88)
"28 DNR" (see page 96)
Status displays
Lit
The current value matches that configured in the reference file.
green:
Lit
The current value does not match that configured in the reference file.
red:
Off:
Comparison with reference file values is not possible, as the reference file could not
be loaded.
To load a reference file:
The following two methods are available.
Use the [REF.RECALL] button to load a reference file.
n
The reference file settings will be applied to the CCU settings.
Execute [REFERENCE] > [REF.DL EXEC] in the ROP menu.
n
The reference file data will be loaded to the ROP. However, the reference file
settings will not be applied for the camera and CCU.
- 26 -
Parts and their functions
[DNR]
menu off (status screen)
[DNR]
menu off (status screen)
Advertisement
Table of Contents
