Table of Contents
Advertisement
Item
IRIS LEV MODE
M.PED CONT
LOCK SELECT
AUTO BUTTON
G/M PED VOL
FREE+LOCK
CAM SEL
DTL BUTTON
SKIN VOL
LCD BRIGHT
PANEL BRIGHT
BUZZER
PERIOD
CYCLE
STD POSITION M.GAIN
Setting value
ABS
Selects between absolute values or relative values to be used for IRIS
RLTV
control operations.
ABS: Absolute value control.
RLTV: Relative value control.
IRIS
Sets whether to enable master pedestal adjustment via the panel's mas-
DISP
ter pedestal dial.
LOCK
Specifies the targets for which lock is applied when you press and hold the
FREE
[SEL] dial.
PUSH
M.PED
AWB
Specifies the function that is executed when the [AUTO] button is
ABB
pressed.
AUTO SETUP
M.PED
Specifies the target items for adjustment when adjusting the pedestal in
G.PED
the [PED], [FLARE], and [B.GAM] adjustment block.
[M.PED]: Adjust the master pedestal.
[G.PED]: Adjust the [PED R], [PED G], and [PED B].
SETUP
Specifies the targets for which partial lock is applied when you press and
IRIS LV
hold the [PANEL LOCK] and [UP (FREE)] buttons at the same time.
PAINT
CAM1 to CAM99
Switches between connected cameras.
UHD
Selects the target of detail control operations on the panel.
HD
UHD: Control UHD detail.
HD: Control HD detail.
UHD
Selects the target of skin tone detail control operations on the panel.
HD
UHD: Control UHD skin tone detail.
S.CORR
HD: Control HD skin tone detail.
S.CORR: Control [HUE], [TONE], and [TABLE] for [SKIN CORRECTION].
1 to 20
Sets the brightness of the LCD panel.
1 to 5
Set the brightness of the panel buttons.
OFF
Enable or disable the buzzer (beep/call tone).
ON
0 to 5
[PERIOD] and [CYCLE] will be the time from which [CALL] was released
for [CAMERA CCU].
PERIOD: Flashing duration (sec).
0.3
CYCLE: Flashing cycle (For 1.0: 500 msec off → 500 msec lit
0.5
1.0
(repeatedly)).
-6 to 0 to +36
Sets the standard position of the master gain (M.GAIN).
- 110 -
___ indicates factory default settings.
Setting details
ROP menu
Advertisement
Table of Contents
