Panasonic AK-HRP1005GJ Operating Instructions Manual page 130

Any of the units registered on the [ROP List] tab can be selected.
2. Click the [REFRESH] button (G)
The user name set on the ROP selected in [Master ROP Number] (A) is displayed in [Old User Name] (B).
The ROP factory default user name is [admin].
3. In the [New User Name] (C), enter the new user name to set.
4. In the [Old Password] (D), enter the password set on the selected ROP.
Entered characters are displayed as [*].
5. In the [New Password] box (E), enter the new password to set.
Entered characters are displayed as [*].
6. In the [Retype New Password] box (F), enter the same password entered in step 5.
Entered characters are displayed as [*].
7. Click the [SET] button (H).
The user name and password are set on the ROP selected in [Master ROP Number] (A).
When cameras with the user authentication function enabled are controlled, the user name and password that were set
here will be required.
Enter the user ID and password configured on the connected device.
- 130 -
Software