Specifications; Server Module - NEC E120e-M User Manual

Table of Contents

Advertisement

Chapter 4 Appendix
1.

Specifications

1.1

Server Module

N code
CPU
Supported CPU
Clock speed
No. of CPUs
Standard / Maximum
3rd cache
Number of cores (C) /
Number of threads (T)
(1 CPU)
Chipset
Memory
Standard/Maximum
Memory module
Maximum clock speed
Error check, correction
Auxiliary
Hard disk
Standard
storage
drive
Maximum
device
Hot swap
Interface level /
RAID level
Optical disk drive
FDD
Device bay
Expansi
Supported slot
on bay
Graphics
Chip / VideoRAM
Graphic display / resolution
Standard interface
Power supply
Redundant power supply
Redundant fan
External dimensions
(width  depth  height)
Weight (Standard/ Max.)
Power consumption (12 VDC, at
maximum configuration, at standby)
Power consumption (12V DC, at
maximum configuration, at high load)
Power consumption (12V DC, at
maximum configuration, in 40°C
environment)
Temperature/Humidity
Accessories
Installed OS
Supported
Support by NEC
OSs
*1
Prepare at least one external DVD-ROM per system for maintenance and OS reinstallation purposes.
*2
Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide.
N8100-2103F
N8100-2104F
Intel ®Xeon® processor
E5-2407v2
E5-2430v2
2.40GHz
2.50GHz
1/2
10M
15M
4C/4T
6C/12T
Intel® C602 chipset
Not pre-installed / Unbuffered DIMM: 96GB (12x 8GB), Registered DIMM: 384GB(12x 32GB)
DDR3L-1600 Unbuffered DIMM(2/4/8GB), DDR3L-1600 Registered DIMM(16GB),
DDR3L-1066 Registered DIMM(32GB)
1066MHz
1333MHz
ECC, x4 SDDC
Not pre-installed
2.5-inch HDD: SATA 4TB(4x 1TB), SAS 3.6TB(4x 900GB), 2.5-inch SSD: SAS 1.6TB(4x 400GB)
Supported
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
External drive (Option) *1
Option: Flash FDD (1.44MB) *2
None
1x PCI EXPRESS 3.0 (x16 lane, x16 socket) (Low profile, 167.6 mm in length)
1x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Embedded on management controller chip
16,770,000 colors: 640x480, 800x600, 1,024x768, 1,280x1,024
3xUSB 2.0 (2x front, x1 internal), 1x Analog RGB (Mini D-sub15-pin, 1x front),
1x Serial port (RS-232C compliant / D-sub 9-pin, Serial Port A, 1x rear),
2x1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2x rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x rear)
(Power supply unit must be installed in module enclosure.)
1000W / 1600W, 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available)
(Maximum: 2)
100 to 120 / 200 to 240 V AC ±10% (when 1000W power supply is used)
or 200 to 240 V AC ±10% (when 1600W power supply is used)
50/60Hz ±3Hz (Power cable: required option)
Supported (hot-plug available)
Supported (hot-plug unavailable)
220.1mm  780.0mm  40.4mm (Projections are excluded)
220.1mm  820.2mm  40.4mm (Projections are included)
5kg / 7kg
127W
124W
226W
248W
254W
271W
Operating: 10 to 40°C / 20 to 80% (when 1000W power supply is used)
10 to 35°C / 20 to 80% (when 1600W power supply is used)
Storage: –10 to 55°C / 20 to 80% (No condensation either when operating or when stored)
Getting Started
Microsoft Windows Server 2008 Standard (RTM,SP2 or later), Microsoft Windows Server 2008
Enterprise (RTM,SP2 or later),
Microsoft Windows Server 2008 Standard (x64)(RTM,SP2 or later), Microsoft Windows Server
2008 Enterprise (x64)(RTM,SP2 or later),
Microsoft Windows Server 2008 R2 Standard, Microsoft Windows Server 2008 R2 Enterprise,
Microsoft Windows Server 2012 Standard, Microsoft Windows Server 2012 Enterprise,
VMware ESXi 5.0,VMware ESXi 5.1
Express5800/E120e-M User's Guide
E5-2430Lv2
E5-2450v2
2.40GHz
2.50GHz
20M
8C/16T
1600MHz
130W
132W
237W
362W
259W
377W
1. Specifications
E5-2470v2
2.40GHz
25M
10C/20T
137W
375W
393W
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800 seriesN8100-2103fN8100-2104f

Table of Contents