Mitsubishi Electric GB-50ADA-J Instruction Book page 15

Item
Air direction
Fan speed
Filter sign
Interlocked ventilator
ON/OFF *1
Fan speed of interlocked
ventilator
Operation Prohibition
mark
*1: The change on the interlock setting between the indoor and LOSSNAY units made on the indoor unit side will not be reflected
on the LOSSNAY unit side on the screen until the OK is pressed and the change is saved. The actual interlock setting,
however, is immediately effective, so as soon as the interlock setting on the indoor unit side is set to ON, the LOSSNAY unit
will go into operation when one or more indoor units go into operation regardless of the display on the screen.
3-3-1-2 Adjusting the operation conditions that target all groups
(1) Click [Batch Operation] from the operation condition monitoring
screen that displays all groups in a list. When air conditioner
groups, ventilator (LOSSNAY) groups, and general equipment
groups exist together in the List, a new screen will appear to
select the group. Click one of the [All Air-conditioners], [All
LOSSNAY], [All Air To Water], or [Other Equipment] and the
screen to set the batch operation will appear.
If there are only air conditioner groups or only LOSSNAY
groups or only Air To Water (PWFY) groups or only general
equipment groups, this selection screen will not appear.
(2) After you have made the settings on the screen for batch
operation, click [OK] and only the items for which operation was
performed will be sent to all the air conditioner, ventilator
(LOSSNAY) groups, Air To Water (PWFY) groups or general
equipment groups.
To return to the previous screen without performing any
operations, click [Cancel].
Note: If the setting range for set temperature is restricted, the temperature
setting range will be smaller.
Note: If operation of an item has been prohibited, then operation is not
possible for that item.
Click to adjust the air direction.
Note: If it is a model that does not support air direction adjustment, this item is not displayed.
Note: Available functions vary depending on the unit model.
Click to adjust the fan speed.
Note: If it is a model that does not support fan speed adjustment, this item is not displayed.
Note: Available functions vary depending on the unit model.
Click [Reset] to specify whether to reset the filter sign. It is set to reset when a green indicator is
displayed on the left of Reset ([ Reset]).
Note: If filter signs are not triggered in the group, then this item is not displayed.
Click [ON] or [OFF] to switch interlocked ventilator ON or OFF.
Note: For groups that are not connected to an interlocked ventilator, the items related to interlocked
ventilators are not displayed.
Click to adjust the fan speed of the interlocked ventilator.
Note: For groups that are not connected to an interlocked ventilator, the items related to interlocked
ventilators are not displayed.
When air conditioners are centrally controlled, a mark that indicates so will be displayed, and if
the prohibit setting has been set for any operations, the operation prohibition mark [
displayed next to those operation items.
If the prohibit setting has been set for an item, it is not possible to operate that item.
Description
14
] will be