Table of Contents
Advertisement
Available languages
Available languages
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear eye protection.
Beware of sharp blades. Blades continue to rotate after
the motor is switched off. Remove disabling device
before maintenance or if cord is damaged.
Beware of flying objects. Keep bystanders away from
the cutting area.
Directive 2000/14/EC guaranteed sound power.
96
Do not expose to rain.
The blades will continue to rotate after the
machine is switched off.
Date Code Position (Fig. F)
The date code
37
, which also includes the year of manufacture,
is printed into the housing.
Example:
2020 XX-XX
Year of Manufacture
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
1
ON-OFF Switch box
ON-OFF button
2
Safety key
3
4
Bail handle
Lower handle
5
Upper handle
6
7
Lower handle locks
Lower handle brackets
8
Handle height adjustment detent holes
9
Upper handle knobs
10
Battery port cover
11
Cut height adjust lever
12
Rear door cover
13
Grass collection bag
14
Grass collection bag handle
15
Upper carrying handle
16
Lower carrying handle
17
Intended Use
This lawn mower has been designed for professional lawn
mowing applications.
DO nOT use under wet conditions or in presence of flammable
liquids or gases.
This lawn mower is a professional lawn care appliance.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
ASSEMBLY
DANGER: To reduce the risk of serious personal
injury, turn unit off, remove safety key, and remove
battery packs before assembly, making any
adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Attaching Upper Handle (Fig. A, C)
1. Line up the holes on the bottom of the upper
handle
6
with the holes on the top of the lower handle
nOTE: Make sure the cord is located on the front of both
handles. If it is not it may result in the cord tangling and the
inability to easily store the mower.
2. From the inside of the upper handle
through the holes.
3. Loosely tighten the knob to the bolt.
4. Rotate the upper handle
6
5. Tighten the upper handle knobs
secured into position.
Adjusting Handle Height (Fig. D)
The mower is shipped in storage mode. You will need to adjust
the handle to operating position before continuing.
1. To unlock the lower handle
quarter turn the two lower handle locks
sides of the lower handle as shown in Fig. D.
2. Raise the lower handle to operating position.
3. Locate the two handle height adjustment detent holes
located on the lower handle brackets
4. Adjust the lower handle to the position that best fits the
operator and lock the lower handle in place by twisting
the lower handle locks
7
allowing them to snap into the
desired detent holes.
Grass Collection Bag (Fig. E, F)
DANGER: Remove safety key and battery packs before
removing mulching insert, and when opening rear door
cover and installing bag.
1. Ensure the mulching insert
mower before proceeding to step 2.
2. Lift the rear door cover
13
bag
14
onto the mower so the bag hooks
lugs
21
as shown in Fig. E. Then lower the rear door cover.
EnGLIsH
5
.
6
, slide the knob bolt
into its operating position.
10
so the upper handle is
5
from storage position, twist a
7
located on both
9
8
as shown in Fig. D.
18
(Fig. F) is removed from the
and place the grass collection
22
rest on the
39
Advertisement
Table of Contents
