Verizon V500 Manual page 9

Verizon V500 / USA EN / A31008-M1931-R301-1-6019 / starting.fm / 30.4.08
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage the notches.
Placing the handset in the base station
¤
Place the handset in the base station
with the handset's display facing out-
wards.
Charging the batteries for the first time
¤
To charge the batteries, leave the hand-
set in the base station or charging cra-
dle continuously for ten hours.
The alternately flashing battery icons =
U
on the upper right side of the display
screen indicate that the batteries are
being charged.
Note:
– If the handset has turned itself off because
its batteries are empty, and you then place
the handset into the base station, it will
turn on automatically.
– Only place the handset into the base sta-
tion or charging cradle specifically
intended for it.
– During handset operation, the battery icon
e
indicates the charge status of the bat-
teries (page 1).
– The batteries may feel warm when they are
charging. This is not dangerous.
For questions and troubleshooting,
see page 31.
Setting the date and time
You should set the date and time, for
example, to ensure the correct time of
incoming calls is recorded.
To change the time and date, open the
input field using:
¢ ¢
s
Settings
§Menu§
¢
Set Date/Time
~
Enter the time and date using
10 digits, for example, Q
M 1 5 Q 1 1
5 Q N for January 15,
2008, 07:15 AM. If the 12-
hour time format is set, use
the * key to switch between
am and pm.
To correct an incorrect entry,
overwrite the character by typ-
ing the correct one.
Press the display key to save
§OK§
changes.
You can change the date and time format:
¢ ¢
s
Settings
§Menu§
¢
Set Format
¤
Choose between day/month and
month/day date formats:
¢ ¢
s
Date Format DD/MM/MM/DD
¤
Choose between 12- and 24-hour time
formats:
¢ ¢
s
Time Format 12 Hours/24 Hours
Selecting the line settings
For each handset and the base station,
you can set how your telephone will use
the two telephone lines:
All incoming calls will ring. For
Auto
outgoing calls, your phone
will use whichever line is cur-
rently free.
Line 1/Line 2
Only incoming calls on the
respective line can be
answered with the c key.
For outgoing calls, your phone
will always use the selected
line.
If you have selected
Line 1
can still answer or make a call on the free
line by using the C or h keys.
First Steps
¢
Date/Time
¢
Date/Time
or 2, you
Line
9