Operating When On The Move (Remote Operation) - Verizon V500 Manual

Verizon V500 / USA EN / A31008-M1931-R301-1-6019 / answering_m+network-mailbox.fm / 30.4.08
Operating the answer machine
For call screening on the handset:
Press the display key to start
§Screen§
call screening.
Toll-Saver Mode – Call acceptance/
charge saving function for remote
operation
For each line, you can set when you want
the answer machine to respond to calls.
The options are:
8 Rings, as well as the cost-saving setting
Toll Saver.
Note:
The number of rings refers to the ring tones of
the base station. If you have selected another
ring tone, the number of rings you hear may
differ from the selected number of rings.
When Toll Saver
mines when the answer machine accepts
calls:
u
If no new messages are present, the
answer machine accepts calls after
Rings.
u
If new messages are present, the
answer machine accepts calls after
Rings.
When operating remotely, you know there
are no new messages after hearing 2 rings
(otherwise the answer machine would
have already accepted your call). There
will be no call charges if you hang up now.
¢
Answer Machine
§Menu§
¢ ¢
Ring Delay
¢
2 Rings/4 Rings/6 Rings/8 Rings/Toll Saver
Press the display key to con-
§OK§
firm your selection.
Changing the language of voice
prompts and prerecorded
announcements
You can select English, Spanish, or French
as the language of voice prompts and pre-
recorded announcements. You can select
different languages for line 1 and line 2.
22
2 Rings, 4 Rings, 6 Rings,
is set, the following deter-
¢
Settings
Line 1/Line 2
¢
Answer Machine
§Menu§
¢
Voice Language
¢
English/Español/Français
Press the display key to con-
§OK§
firm your selection.
Operating when on the move
(remote operation)
You can check or activate the answer
machine from any other telephone (hotel,
pay phone, etc.).
Requirements:
u
The phone you are using for remote
operation must have tone dialing
(DTMF), so that you hear different
tones when you press the keys.
u
You must activate
Activating Remote Access
¢
Answer Machine
§Menu§
4
¢
Remote Access
Press the display key to con-
§OK§
firm your selection.
2
Calling the answer machine and
playing back messages
~
Dial your own number.
; ~
While listening to your
announcement, press the ;
key and enter the system PIN.
You will be informed whether any new
messages have been recorded. The mes-
sages are then played back. You can now
operate the answer machine using the
keypad.
Operating the answer machine using the
keypad
The following keys are used:
0
Delete the current message.
A
Repeat the previous message.
¢
Settings
¢
Line 1/Line 2
Remote Access.
¢
Settings
¢
On/Off