Using The Network Mailbox; Configuring The Network Mailbox; For Fast Access - Verizon V500 Manual

Verizon V500 / USA EN / A31008-M1931-R301-1-6019 / answering_m+network-mailbox.fm / 30.4.08
B
Play the message.
3
Skip to the next message.
G
Turn on the answering machine.
H
Stop message playback.
9
Turn off the answering machine.
;
Enter the remote access code if
the answering machine is on.
Note:
After message playback, if no key operation
is detected for 10 seconds, the call will be
terminated.
Activating the answer machine
~
Dial your own number.
¤
Allow the phone to ring until the ring
back tone stops and the phone
answers.
~
Enter system PIN.
G Press the G key.
You will hear a beep. Your answer
machine is now activated and the acti-
vated announcement is played back.
Deactivating the answer machine
~
Dial your own number.
; ~
While listening to your
announcement, press the ;
key and enter the system PIN.
9 Press the 9 key.
You will hear a beep. Your answer
machine is now deactivated.

Using the network mailbox

The network mailbox is your network pro-
vider's answer machine within the net-
work. You cannot use the network mail-
box unless you have requested it from
your network provider.
Using the network mailbox

Configuring the network mailbox

for fast access

Entering the network mailbox number
¢ ¢
Voice Mail
§Menu§
¢
Line 1/Line 2
~
Enter the number of the
§OK§
network mailbox and
press .
§OK§
The setting for fast access applies to all
handsets.
If your network voice mail requires a pass-
word for access, it is possible to add a pass-
word by entering pauses immediately
after entering the mailbox access number,
then entering your password.
Calling your network mailbox
¢ ¢
Voice Mail
§Menu§
¢
Line 1/Line 2
Select which mailbox you
§OK§
want to call and press
If you have new messages in your network
mailbox:
Press the display key to call
§Call§
your network mailbox.
If you have new messages only for one
network mailbox, the respective mailbox
is immediately called.
If you have new messages for both net-
work mailboxes:
When using a handset:
Line 1/Line 2
Select the line and press
start the call.
When using the base station:
/ Press the respective display
Line 1 Line 2
key to start the call.
For further operation steps, please refer to
the instructions provided by your mailbox
operator.
Settings
Call VM
.
§OK§
to
§OK§
23