Samsung SNH-V6430BN User Manual page 20

Connection using the Wi-Fi Direct function
What is Wi-Fi Direct?
Using Wi-Fi Direct, you can easily connect your camera to a router without a
cable.
1. When the power is connected, the power status LED lights up in red and
starts blinking when boot-up is complete.
2.
Press and hold the Wi-Fi Direct button on the camera for 5 seconds, and the
color of the LED will change to yellow/orange.
<Wireless Router>
Wi-Fi Direct Button
3.
Register and select a camera, referring to the instructions in the mobile guide.
4.
When the camera connects the server, the LED turns green.
5.
Set up the wireless network environment in accordance with the <Wireless
Network> guidance on page. 31.
n
The camera can only be registered via mobile.
You can connect in relay mode if the router doesn't have UPnP.
Configuration may differ depending on the router model. Please refer to the router
manual.
Please contact the service provider if you have difficulty connecting to the Internet.
20 · English
Mobile