Instrument operation
Depth alarm setting screen
The water depth for the depth alarm can be
set.
Depth Alarm
Save
Item
Save
Back
To adjust the water depth setting:
1 Slider control
To reduce the water depth setting, drag the
slider to the left.
To increase the water depth setting, drag the
slider to the right.
TIP:
If the water depth is set to 0.0 m (0.0 ft), the
depth alarm will not operate.
Maintenance setting screen
This screen displays the number of hours that
the engine has been running since the last
maintenance.
60
0.
0
ft
Back
Function
Saves the set water depth
as the current depth alarm
setting and displays the
setting screen.
Displays the setting screen
without saving the set wa-
ter depth.
1
Time Since Last Maintenance
Reset
After maintenance is performed, reset the
number of hours of operation as follows.
To reset the number of hours of operation:
(1) Tap the "Reset" button.
1
Reset
1
"Reset" button
(2) When the confirmation message ap-
pears, tap the "YES" button to reset the
number of hours of operation.
1
YES
Are you sure ?
1
"YES" button
TIP:
To return to the maintenance setting screen
without resetting the number of hours, tap
the "NO" button.
Factory reset screen
This screen can be used to reset the settings
to their factory default settings.
0
Hrs
Back
Back
NO