Navigation And Anchor Lights Checks; Horn Switch Check - Yamaha 195S 2021 Owner's/Operator's Manual

Pre-operation checks
Push the blower switch to operate the blower
and ventilate the engine compartment for at
least 4 minutes.

Navigation and anchor lights checks

Make sure that the bow light and anchor light
operate properly.
The procedure for setting up the anchor light
varies according to the model. See the page
indicated below for your boat.
SX195 / SX190: See page 88.
TIP:
SX195 / SX190: Before operating the boat in
daylight hours after checking the navigation
and anchor lights, store the anchor light.
195S / AR195 / AR190
2
1 Bow light
2 Anchor light
SX195 / SX190
2
1 Bow light
2 Anchor light
114
To check the operation using the navigation
and anchor lights switch:
(1) Push the top of the navigation and an-
1 Navigation and anchor lights switch
(2) Push the bottom of the navigation and
1
(3) Put the navigation and anchor lights

Horn switch check

Push the horn switch and check that the horn
sounds.
1
1 Horn switch
chor lights switch and check that the
bow light and anchor light come on.
1
CTSY
NAV/ANC BILGE
LIGHTS
anchor lights switch and check that only
the anchor light comes on.
switch in the middle position and check
that the bow light and anchor light are
off.
CTSY
NAV/ANC BILGE
LIGHTS
HORN
1
HORN