Specification - Mitsubishi Electric LAN UNIT Technical Manual

Basic specifications
access point
Connected equipment
power supply
Communication interface
External storage medium
External input / output
External dimensions
Mass
Ethernet communication
Communication standard
Interface
Communication speed
Supported protocol
IP address
･Ethernet is a trademark of Xerox Corporation.
･The company name and the product name to be described in this manual are registered trademarks or
trademarks of each company.

[12] Specification

MITSUBISHI LIMI Servo
XC-G series
XC-G series control box
Control switch panel
DC12V
(Supplied from the control box)
Ethernet communication (1 port)
RS232C serial communication (2 port)
USB communication (2 port)
CON C
Input 4 point (analog 2 point), Output 3 point (analog 1 point), total 7 point
125mm(W) × 155mm(D) × 40mm(H)
- 13 -
Mitsubishi electronic pattern sewing
machine
PLK-G series control box
(System ver.S100W018 or later)
(Supplied from the control box)
USB flash drive
300ｇ
10BASE-T/100BASE-TX
RJ-45 connector 1 port
100Mbps
CC-Link IE Field Basic
Write from USB flash drive
PLK-G series
DC12V