Toro ECXtra Programming Manual page 3

D. SETTING THE WATERING DAYS
TURN THE DIAL TO SET WATERING DAYS
•
•
•
USING THE +/- BUTTONS, SELECT OR DELETE DAYS FOR
• -(+) IS USED TO SELECT
• -(-) IS USED TO DELETE
**WHEN SUNDAY FLASHES AGAIN, PRESS THE NEXT BUTTON
E. TURN DIAL TO AUTO/RUN
INTERVAL WATERING (OPTIONAL) ODD/EVEN DAYS
•
•
•
•
•
•
•
*USE "PROGRAMS" SLIDE SWITCH TO CREATE ADDITIONAL PROGRAMS.
REPEAT STEPS B, C, D, AND E ABOVE.
F. Clear Program Memory
To clear the memory
•
Turn the dial to the off position.
•
Press "+" and "-"button at the same time.
G. Replacement Parts
Module
¾ Amp Fuse 363-5026
Transformer 363-3514B
NOTE: ALL THRE PROGRAMS (A, B, & C) WILL RUN EVERY DAY
REGARDLESS OF SLIDE SWITCH POSITION. TO PREVENT A PROGRAM
FROM RUNNING, IT MUST BE TURNED OFF UTILIZING THE "START TIMES"
FEATURE.
CAL SHOULD FLASH
PRESS THE NEXT BUTTON
WATERING
WHEN CAL FLASHES, PRESS THE (+) BUTTON
INT SHOULD FLASH
PRESS THE NEXT BUTTON
ADJUST THE PROPER INTERVAL SETTING USING THE +/-
BUTTONS
PRESS THE NEXT BUTTON
DAY SHOULD FLASH
USING THE (+) BUTTON, SELECT THE DAY TO START
INTERVAL
53714
- 3 -