Advertisement
Instruction Manual for Self-learning
model RMC-600(LRT-1) & Y2K10L
RMC-600(LRT-1)
Note: If the original remote is code hopping you will not be able to copy it
successfully.
1). Adjust the frequency:
a. Find out the frequency of original remote and move the jumper to
corresponding position as above figure.
b. Place LRT-1 on a flat surface (keep away from metal table), press 1st and 2nd
buttons of LRT-1
flashes 4 times(still hold 1st button).
at exactly same time.
Y2K10L
Release 2nd button after the LED light
1
Advertisement
Table of Contents
Related Manuals for Remocon LRT-1
Summary of Contents for Remocon LRT-1
- Page 1 Find out the frequency of original remote and move the jumper to corresponding position as above figure. b. Place LRT-1 on a flat surface (keep away from metal table), press 1st and 2nd buttons of LRT-1 at exactly same time.
- Page 2 LED show maximum brightness when the distance reaches 3cm. ** If you have a frequency counter, you can adjust the frequency of LRT-1 to right frequency by frequency counter directly. 2). Copy the buttons: e.
Need help?
Do you have a question about the LRT-1 and is the answer not in the manual?
Questions and answers