Start A Single Auxiliary Scene; Cancel A Single Scene; Run All Auxiliary; Stop All Auxiliary - Toro EVOLUTION Series Manual

Start a Single Auxiliary Scene

1. Turn on the remote. It defaults to
Manual mode.
2. Press or to select the
desired Auxiliary Scene (A1 - A4).
3. Press to move to run time.
4. Adjust runtime with
.
5. Press to begin auxiliary run.
Enter
The Auxiliary Scene numbers (A1, A2, and A3)
correspond with the EVOLUTION®
Auxiliary numbers (AUX 1, AUX 2, and AUX 3).

Cancel a Single Scene

Select the currently running scene and press

Run All Auxiliary

Running all scenes is useful for troubleshooting an auxiliary
system.
1. Press several times to display
AA on
" ".
2. Press to turn on all
Enter
auxiliary scenes.
MANUAL
A2 05
SINGLE RUN MIN
TIME
Auxiliary scene 2 is set
and
to run for 5 minutes.
Setup PWR (Hold)
controller's
Cancel Enter
.
Cancel
MANUAL
AA on
Setup PWR (Hold)

Stop All Auxiliary

1. Press several times to display
AA oF
" " (off).
2. Press to turn off all
Enter
auxiliary scenes.
Change from One Running
Scene to Another
Mode
It is possible to run more than one individual scene at a time.
Start a single auxiliary scene (above), then simply move to the
next scene and repeat the same steps. Previously running scenes
continue.

Return to Irrigation Mode

Press and hold down
"toro". Release.
Mode
MANUAL
AA of
Setup
Cancel
until the screen displays
PWR(Hold)
Mode
Mode
PWR (Hold)
Enter
7