NEC Express5800 User Manual page 80

4-30 Configuring Your Server
2.
Check the description as shown below on the POST screen, then press Ctrl + M.
LSI Logic SoftwareRAID BIOS Version xxxxxx
LSI Logic MPT RAID Found at PCI Bas No:xx Dev No:xx
Scaning for Port 00 Responding xxxxxxxx xxxxMB
Standard FW xxx DRAM=128MB(SDRAM)
xx Logical drive(s) Configured
Press <Ctrl><M> to Run LSI Logic Software RAID Setup Utility
LSI Logic Software RAID Setup Utility starts, and its TOP Menu appears.
LSI Logic Software RAID Configuration Utility TOP Menu
See "Menu Tree" and "Operating Procedures for Setup Utility" described later for setup and
operation of disk array.
Exiting from the Utility
Press Esc in the TOP menu of LSI Logic Software RAID Setup Utility.
When a confirmation message appears, select [Yes].
When the above message appears, press Ctrl + Alt + Delete.
The CPU blade is rebooted.
(Management Menu)