Problems With Windows Server 2003 - NEC Express5800 User Manual

Problems with Windows Server 2003

Cannot install the operating system correctly.
Did you confirm the notes on installing the operating system?
→ See Chapter 5.
The system displays the message below and fails to log in:
→ In Windows Server 2003, the following message will be displayed if you use the
operating system without executing the license authentication.
Select "Yes", and execute the procedure for license authentication.
Windows Product Activation
This copy of Windows must be activated with Microsoft before you can
continue, You cannot log on until you activate Windows.
Do you want to activate Windows now?
To shut down the computer, click Cancel.
The Telnet Service is not installed.
Adjust the computer name to 14 characters or less, and then install the Telnet Service according to
<How to install the Telnet Service>.
<How to install the Telnet Service>
1.
Click [Run] on Start menu.
2.
Type "tlntsvr /service" in the [Open] box, and click [OK].
3.
Click Start menu, point to [Control Panel] and click [Computer Management] and then
click the [Services] to specify whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer
name is set to 15 characters or more.
YES NO Cancel
Troubleshooting 8-15