NEC Express5800 User Manual page 205

8.
When the following message is shown, press Enter to start "Welcome to Setup".
9.
When the installation of Windows Server 2003 R2 x64 Edition has finished, the system
reboots automatically.
10.
The [Windows Setup] screen will be displayed after logged on to the system.
IMPORTANT:
In this case, the [Windows Setup] screen may not be displayed.
Be sure to install Microsoft Windows Server 2003 R2 x64 Edition
DISC 2 according to the following procedures.
You can install Microsoft Windows Server 2003 R2 x64 Edition
DISC 2 after the application of "System update". Be sure to install
Microsoft Windows Server 2003 R2 x64 Edition DISC 2. In this case,
note that the [Windows Setup] screen is not displayed.
11.
Insert Microsoft Windows Server 2003 R2 x64 Edition DISC 2 CD-ROM into the DVD-
ROM drive.
Confirm the parameters and click [OK].
12.
When the installation has completed, remove Microsoft Windows Server 2003 R2 x64
Edition DISC 2 CD-ROM from the DVD-ROM drive, and restart the system.
After installation is completed, be sure to execute the tasks described in "Setup of Device
Driver (Normally Installed in Server)" and "Updating the System" of this chapter.
Installing the Operating System B-7