Panasonic WJ-SX 150A Operating Instructions Manual page 126

WJ-HD500 SERIES CONTROL (TERMINAL MODE)
Matrix switcher can control Digital Disk Recorder WJ-
HD500 Series. The following is the procedure of WJ-HD500
Series SETUP MENU.
Notes:
• The following operating procedures are for the terminal
mode. If you are using a PS·Data system controller,
refer to p. 141.
• When a Multiplexer board is installed in the unit, you
can neither connect nor control a WJ-HD500 Series
recorder. You need to remove the board from the unit.
Displaying WJ-HD500 Series
SETUP MENU
To display WJ-HD500 Series SETUP MENU, follow the pro-
cedure below.
1. Confirm that WJ-HD500 Series is correctly and securely
connected.
2. Select the desired monitor. (Refer to p. 106 Monitor
Selection.)
3. Enter the recorder mode. (Refer to p. 131 Recorder
Mode.) Then, the selected monitor number and "–H00"
will appear on the LED display.
4. Press the SETUP button while holding down the SHIFT
button on the system controller.
WJ-HD500 Series SETUP MENU will appear on the
active monitor and the system controller's SETUP indi-
cator will light up.
The following functions and buttons are valid in SETUP
MENU.
Joystick to UP ( ): Moves the cursor up.
Joystick to DOWN ( ): Moves the cursor down.
Joystick to L (t): Moves the cursor to the left.
Joystick to R (s): Moves the cursor to the right.
CAM (SET) button: Executes the selections and dis-
plays a submenu.
130
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
MON (ESC) button: Returns to SETUP MENU or the
previous menu.
L
DOWN
F1 ACK RESET
CAM SETUP SUSPEND ALL RESET
F2 GROUP SEQ TOUR SEQ
INDEX REW/FF STILL
PREV NEXT
MON STATUS
RECORDER STEP EL-ZOOM
STOP PAUSE
ALM H
STOP PLAY PAUSE SEQUENCE
MON (ESC)
OSD
MON LOCK
SETUP SHIFT
5. To end the setting and return to the normal view, press
the SETUP button while holding down the SHIFT button
when SETUP MENU is displayed. The system con-
troller's SETUP indicator will go out.
UP
R
CALL
PRESET
T&D CAM ID EVENT
AUX1 OFF AUX1 ON PROGRAM
PRESET
ALL
AUTO PAN
AUX2 OFF AUX2 ON
VLD H SYS S
CAM FUNC
DEF OFF DEF ON
CAM (SET) CLEAR
LOG OUT
WIPER
MULTI SCREEN SEL