Panasonic WJ-SX 150A Operating Instructions Manual page 109

Camera Panning Function
There are three panning modes available as follows: auto
pan, sort mode and sequence mode. Refer to p. 16
Camera-related Functions for details on each mode.
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. Press the AUTO PAN button four times while holding
down the SHIFT button.
"PAN" will appear on the LED display of the controller as
shown in the figure.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX REW/FF
PREV
RECORDER
STOP
STOP PLAY
OSD
SETUP
3. Press the assigned numeric button shown below to acti-
vate the panning function of the selected camera.
The LED display indicates the selected mode as fol-
lows.
1: Activates AUTO PAN "PA PA".
2: Activates SORT PAN "PA SO".
3: Activates SEQUENCE PAN "PA SE".
Note: The AUTO MODE parameter previously set in the
camera's SETUP MENU will be automatically
replaced to the activated function parameter.
112
RESET
ALL RESET
TOUR SEQ
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
4. To exit from the mode, press the MON (ESC) button,
then press the AUTO PAN button while holding down
the SHIFT button.
CALL
PRESET
PROGRAM
PRESET
AUTO PAN
CAM FUNC
CLEAR
LOG OUT