Running Sequence; Tour Sequence; Group Sequence - Panasonic WJ-SX 150A Operating Instructions Manual

RUNNING SEQUENCE

Tour Sequence

The following functions are available if a tour sequence has
been previously configured through SETUP MENU or WJ-
SX150A Administrator Console. Any tour sequence can be
assigned to any monitors.
1. Select the desired monitor and camera. (Refer to p. 106
Monitor Selection and p. 107 Camera Selection.)
2. To select the desired tour sequence number, press the
numeric buttons.
3. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
4. Press the TOUR SEQ button to run the tour sequence in
the forward direction on the active monitor.
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX REW/FF
PREV
RECORDER
STOP
STOP PLAY
OSD
SETUP
5. Press the PAUSE button to pause a tour sequence on
the active monitor.
The "P" sign (indicating the pause status) is displayed
at the tour sequence number on the active monitor, and
a camera number currently selected appears on the
LED display.
6. Press the PAUSE button to restart a tour sequence for-
ward from the next step that was previously paused by
pressing the PAUSE button.
7. Press the NEXT button to move the sequence one
frame to the next step from the step that was previously
paused by pressing the PAUSE button.
114
RESET
ALL RESET
TOUR SEQ
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
STEP EL-ZOOM AUX2 OFF AUX2 ON
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
PAUSE SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
8. Press the PREV button to move the sequence one
frame to the previous step from the step that was previ-
ously paused by pressing the PAUSE button.
9. Press the STOP button to stop a tour sequence on the
active monitor and return to spot monitoring.

Group Sequence

The following function is available only if a group sequence
has been
Administrator Console.
As described earlier, a group sequence determines the
assignment of monitors and cameras. Therefore, monitor
selection is not required.
1. Press the numeric buttons to select a desired group
sequence number.
2. When you have selected a wrong number, press the
CLEAR button to clear the numeric input.
3. Press the GROUP SEQ button to run a group sequence
forward on the assigned monitors.
CALL
PRESET
PROGRAM
PRESET
F1
AUTO PAN
CAM SETUP
F2
CAM FUNC
INDEX
CLEAR
LOG OUT
RECORDER
STOP
STOP
SETUP
4. Press the PAUSE, NEXT or PREV button to operate the
group sequence. Refer to Step 5 to 8 of Tour Sequence
in this page for how to use these buttons.
5. To stop the sequence, select one of the monitors that
are being run on the selected group sequence, then
press the STOP button.
Note: If an alarm is activated during a sequence pause, the
sequence runs again after the unit recovers from the
alarm mode.
previously established
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM ID EVENT
REW/FF AUX1 OFF AUX1 ON
STILL
PREV NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
DEF OFF DEF ON
PLAY PAUSE SEQUENCE
MON (ESC) CAM (SET)
OSD
MON LOCK WIPER
SHIFT MULTI SCREEN SEL
in WJ-SX150A
CALL
PRESET
PROGRAM
PRESET
AUTO PAN
CAM FUNC
CLEAR
LOG OUT